16. The use and use of low-soak carpet water



Main use: Low soak carpet water is alkaline, high concentration formula. Volatilization speed is fast, the foam is very little, the stain removal force is very strong, has the effect of antibacterial, anti-mildew, deodorization and so on. If used with steam carpet machine, the effect is better. Suitable for all kinds of long and short hair carpet, after washing, the carpet is soft and fluffy, elastic, bright and clean as new, and fragrant.



Usage: 1. Mix low-soak carpet water in warm water. The water mixing ratio is: generally, 1 part to 10 parts hot water. If dirt is heavy, 1 part to 3 parts hot water. 2. Use a steam engine to spray carpet water on the carpet, and after about 5 minutes, the stain will leave the carpet fiber.



17. The use and use of carpet stain remover




Main Uses: carpet stain remover is a lysozyme stain remover, can effectively dissolve and remove stains, no damage to the carpet. Suitable for cleaning wool, cotton, all kinds of chemical fiber, blended and nylon carpet tea stains, coffee, oil stains, drink stains, lipstick, blood stains, etc.



Usage: 1. Add water 1~5 times, spray on the carpet stains, clean with a cleaning machine or wipe with a rag. 2. Avoid contact with skin and eyes, and wear protective gloves when using.



18. Use and use of defoamer




Main Uses: Defoamer is a lysozyme detergent. It has strong defoamer and foam inhibition ability to water quality. It is suitable for carpet extractor and water suction machine. It can quickly eliminate the foam generated during the operation of the machine and effectively inhibit the formation of foam. Ensure the normal operation of the machine, while greatly reducing the work intensity of maintenance personnel.




Usage: Pour a small amount of people into the water suction machine or add to water or detergent, can effectively eliminate foam or prevent foam formation.




19. Use and use of electrostatic dust removal liquid


Main Uses: electrostatic dust removal liquid is a lysozyme detergent, which is used for modern high-end home floor, waxing floor, and the ground requiring high cleanliness. It can enhance the ability of dust pushing and vacuuming, and the floor drag after vacuuming is easy to shake off the dust.


Usage: Spray the product on the dust and push it to the bottom, then use it for ground dust removal.



20. Use and use of special toilet cleaning agent



Main use: Toilet cleaner is acidic. It is used to clean the urine tank and toilet pit. At the same time, you can clean the stains on the surface of the wash basin, bathtub, porcelain basin, tile and so on.



Usage: 1. Mix 1 part of this product with 6 parts of water and spray it onto the surface of the cleaning material for cleaning. After a few minutes, rinse with water. 2. If the surface nature of the washed object is unknown, it should be tested in an inconspicuous place first. If there is decolorization, use clean water and stop using immediately. 3. Avoid touching the skin and eyes. In case of carelessness, rinse immediately with plenty of water, do not inhale, and wear protective gloves when using.



21. Use and use of stainless steel maintenance agent



Main use: stainless steel maintenance agent is a polishing agent, specially used for cleaning and maintenance of stainless steel surface. Strong decontamination ability, can effectively remove oil, rust. After use, a protective film is formed on the stainless steel surface to keep the metal surface bright and clean as new. Dustproof and fingermark proof.




Usage: 1. Pour a little of this product on a dry rag and wipe the stainless steel surface. 2. Keep away from fire when storing this product.




22. Use and use of waxing water




Main use: waxing water is alkaline. It can quickly and effectively dissolve various waxes and other oily substances, and is a must before the floor is rewaxed.



Usage: 1. Spray the original solution or diluent evenly on the waxed surface and soak for about 5~10 minutes. 2. Before the waxing water is dried, use a floor washer or mop to remove old wax. 3. Use water suction machine to absorb residual wax sewage, and finally clean the ground with clean water or neutral green water. 4. Recommended dosage: general wax (1:4), stubborn wax (1:2) or stock solution. 5. When using, wear protective gloves to avoid touching skin and eyes. In case of contact, immediately rinse with plenty of water or seek medical attention.



Use and use of green water




Main Uses: Green water is neutral, is the daily maintenance of the floor must, can quickly remove the ground stains without loss of wax luster, neutral formula, do not need water. After wiping, the wax surface is more bright after polishing treatment, and has a certain disinfection effect.




Usage: General surface cleaning, take 1 cup of this product (about 500g) mixed with l bucket of water (about 15kg) mop wax floor; Stubborn stains Add 1 part of this product to 4 parts of water mop wax floor, and then wax polishing.



24, the use and use of air fresheners




Main use: Air freshener is a neutral cleaning agent, which can eliminate odor and odor of objects.




Usage: It can be sprayed into the air or objects, generally using the original solution can also be diluted 3-5 times with water.




25, the main use and use of copper paste




Main uses: Copper polishing paste is a polishing agent, mainly used to protect copper products, remove copper rust, make it bright. Can also be used for stainless steel cleaning and maintenance.




Usage: Pour a little of this product on a dry rag, wipe the surface of copper products. ,





26. The use and use of dishwashing liquid





Main use: Dishwashing liquid is alkaline and is one of the most widely used cleaning agents.


Ordinary detergent is suitable for the decontamination of any material, and its disadvantage is that the decontamination power is poor.






Usage: When using, dilute with water according to different cleaning objects. After use, it must be washed with clean water.






27. Uses and methods of use of caustic soda






Main Uses: caustic soda is alkaline, is a strong decontamination, degreasing agent, suitable for washing stubborn oil stains and dirt.






Usage: caustic soda is highly corrosive, and if the surface properties of the detergent are unknown, it should be tested in an inconspicuous place. If there is decolorization or corrosion, rinse with water and stop using immediately.



28. Use and use of concentrated oxalic acid




Main Uses: Concentrated oxalic acid is a strong acid. Used to clean plastic, tile, Mosaic, terrazzo floor, toilet toilet dirt (urine) dirt. It has bactericidal, descaling and deodorizing effects.



Usage: Dilute this product 2~3 times, wash enamel, tile, Mosaic, terrazzo floor, toilet toilet.




29. The purpose and use of banana water




Main Uses: Banana water is a solvent stain remover, which can be used for paint, nitro primer and cleaning tools with low quality requirements.



Usage: This product is flammable, explosive, toxic, pay attention to labor protection when using.




30. Use and use of decontamination powder




Main uses: Used to remove the smoke scale or carbon deposits outside cookware, aluminum POTS and aluminum POTS. Can also be used to remove glass, ceramic tile, tableware, gas stove and oil fume and various metal rust.




Usage: Use a damp cotton cloth or a wet rag dipped in this agent to wipe the dirty surface, and then wash it off with water.



31. Use and use of washing powder





Main use: Can easily remove moderate and severe dirt. Especially for animals, plants oil, cleaning effect is remarkable. It is the first choice for heavy scale cotton and hemp fabric washing, and can also be used for other aspects of stain cleaning.




Usage: Apply the product directly to the surface of the stain, rub or wipe.




Use and use of alcohol




Main uses: Used to clean household appliances shell, cotton fabric, carpet stains.




Usage: Use alcohol directly on the stained surface for wiping or rubbing.






Use and use of gasoline






Main use: gasoline is a solvent detergent. Mainly used for the removal of oil, oil dirt and other substances.






Usage: Use the gasoline directly on the surface of the stain to dissolve or wipe.