What are the differences in the application fields of different silicone adhesives?
Hits: 466
img
Silicone rubber as a commonly used reinforcement material has a certain usefulness in the field of building reinforcement engineering or in other fields such as automobile and ship decoration. However, do you know what are the differences between different application areas of silicone rubber? Let the reinforcement home introduce to you the differences between the three different applications of silicone rubber.
1. Silicone structural adhesive:
2.It is mainly used for structural or non-structural bonding assembly between metal and glass of glass curtain wall
2.Structural bonding seal of insulating glass
3. It can connect glass directly to the surface of metal pendants to form a single assembly component, which meets the design requirements of curtain walls with full or semi-hidden frames.
2. Neutral weathering adhesive:
1. Suitable for weather-resistant sealing of various curtain walls, especially recommended for weather-resistant sealing of glass curtain walls, aluminum-plastic panel curtain walls, and stone dry hanging
2.Seam sealing on the surface of concrete, cement, masonry, rock, marble, steel, wood, anodized aluminum and painted aluminum. In most cases, no primer is required.
3.Seam sealing between metal, glass, aluminum, ceramic tile, plexiglass, coated glass
Third, acid glass glue:
1. Suitable for sealing, plugging, leak-proofing and weatherproofing, both indoor and outdoor (the indoor effect is better), the effect of seepage prevention and leakage is remarkable
2. Bonding and sealing equipment parts
3.Joint gaskets on heating and cooling equipment
4. Bonding various interior decoration of automobiles, including metals, fabrics and organic fabrics and plastics
5.Seal the window on the oven door, the flue on the gas appliance, the pipe joint, and the passage door
6.Install ribs, nameplates and paint and plastic materials without screw holes on the metal surface
7.Provide instant opening leakproof pad for gearbox, compressor and pump
8.Seal the ship's warehouse and window
9.Forming anti-wear coating
10.Sealing of glass windows of trailer and truck cabs
11.Inlay and fill thin metal sheet stacks, duct networks and equipment enclosures
Entry introduction: Silicone rubber, the English name is "Silicone", is a part of organic silicon products. It is mainly divided into deacetic acid type, dealcoholization type, deammonia type, deoxime type and so on. Glass glue is commonly known as silicon gelatin. The product is similar to an ointment, and can also be called a paste. Once exposed to air during use, it will solidify into a tough, rubber-like solid material.
The classification of silicone rubber is mainly divided into one-component and two-component. The curing of one-component is caused by the change of physical properties by contact with the moisture of the air. The two-component refers to the two groups of A and B. It does not form a solid when it exists alone, but once the two sets of glue are mixed, the product solidifies. At present, the more common one-component silicone rubber is one-component silicone rubber, and the one-component silicone rubber is divided into two kinds of neutral and acid, and the other is structural adhesive.