Construction Method of Silicone Waterproofing Agent（III）

Organosilicon waterproofing agent is an ideal waterproof material for building materials such as concrete, masonry, ceramics and so on. It can be sprayed on the surface of building with solution and emulsion to improve its waterproof, antifouling and dustproof.


Corrosion resistance, weathering resistance and durability.


Construction Method of DR Series Stone Protective Agent


1. Sample application test of each surface to be treated before construction.


2. Clean the stone surface, keep the stone surface dry (DB-SO1 should be slightly wet) and keep the construction site well ventilated.


3. The protective agent should be applied directly on the stone surface, and the stone surface should be uniformly and satisfactorily brushed. After brushing, the stone surface should have a certain medicinal liquid membrane for its absorption and permeation. After brushing, the treated surface is dried naturally. Depending on the absorptivity of the material, if you need to brush both sides, brush the first time for 30 to 60 minutes and then brush the second time. Place for 5 to 10 minutes after construction. If there are still liquid residues, wipe the excess liquid with soft cloth and maintain it without water for at least 24 to 72 hours.


4. Theoretical consumption: 5-30 m2/L.


Transferred from Jiangxi Building Waterproof Association