Petroleum industrial defoamer IOTA XPJ-100A

Typical characteristics:

Composed of fatty alcohol polyether, defoaming synergist and dispersant

Instant defoaming speed

Completely free of silicone, more effective for small stubborn foam

Good defoaming, antifoaming and degassing effects at lower concentrations, good dispersion

Uniform and stable in strong acid and alkali

Technical Parameters：

Appearance： Colorless to pale yellow liquid

Density (g/cm 325 ° C)： around 0.95

Application：

Cementing cement, concrete admixture, circuit board cleaning.

A field that requires high defoaming and eliminates stubborn fine foam.

Instructions:

   The IOTA XPJ-100A defoamer is a mixture, the system is unstable, and delamination and a little precipitation may occur after a long period of time, which is a normal phenomenon. It is recommended that the user stir a little before use, without affecting the use effect.

  IOTA XPJ-100A defoamer product can not be diluted with water. If diluted with water, it may lead to delamination and defoaming effect.

During cementing construction, due to the application of various admixtures in the cement slurry, foaming occurs during the pulping process, thus changing the cement density and other properties, making it difficult to monitor and control the density and performance of the cement slurry on site, and the construction quality cannot be Guaranteed and even caused the construction to fail or fail.

In addition, the bubble-containing cement slurry well will change the liquid column pressure, and the fluid in the high-pressure formation will enter the annulus, which will worsen the cement bond quality and the cementation between the cement ring and the casing and the well wall, and even the gas (water) Oh, so this kind of cement slurry must use defoamer to remove foam to ensure the construction and construction quality. The conventional antifoaming agent can only eliminate the foam on the surface of the can, and the foaming resistance caused by the re-stirring is poor.
IOTA XPJ-100A defoamer is a product made of the foaming agent used in the oil well cement slurry. It is a kind of product with considerable water solubility.

IOTA XPJ-100A defoamer can be based on the on-site water quality and the foaming condition of the admixture. The general dosage is (0.05-0.2)%. It can be mixed with other admixtures at the same time or directly added to the canister. It can also be used in the pulping cart. The square box can be added to achieve good defoaming and antifoaming effects.

Package:

25kg, 50kg, 200kg plastic drums and 200kg inner coated iron drums.

Storage and transportation:

It is suitable for storage at room temperature. Do not place it near the heat source. Do not expose it to sunlight. Do not add acid, alkali or salt to the defoamer. After dilution with water, it can not be stored for a long time. It will not be stratified within one year. If it exceeds this period, there will be delamination and demulsification. It can be stirred evenly before use, and it will not be affected by the use effect. It will be transported as non-dangerous goods.

Safe for use:

Customers should read the product manual carefully and use the necessary defoaming test before using this product in batches to ensure safe use. If you have any questions about the product, please contact us, our company will be happy to help you.

This material has been compiled based on our current knowledge and experience, and this information should not be used to replace any tests you may need to fully meet your characteristics when using our products on a large scale or in batches. Due to the loss caused by the product not meeting the sales quality indicators, the company only undertakes to refund the purchase price or replace the product. The application or use suggestions we provide are for reference only.