Home    Company News    Chemical laboratory safety management system

Chemical laboratory safety management system

Hits: 392 img

Anti-theft
Strengthen defense, check frequently, and plug the loopholes.
Non-workers are not allowed to enter the instrument room, and doors and windows are closed immediately when no one is indoors.
The instrument room is not welcome, no accommodation, without the consent of the leader, declined to visit.
Private valuables must not be stored in the office. In the event of a theft, protect the scene and report to the leadership and security departments in a timely manner.


2. Fireproof, explosion-proof
The equipment room is equipped with fire protection equipment: fire extinguishers, sand boxes, etc. It is strictly forbidden to heat the inside of the instrument room.
The flammable and explosive chemicals should be properly kept separately. The storage should be done according to the performance of the drugs, and safety should be paid attention to.
When doing chemical experiments, it must be carried out in strict accordance with the operating procedures, and beware of accidents such as fire and explosion.


3. Waterproof
The upper and lower sewers of the laboratory must be kept open. The main building of the laboratory should have a tap water gate. The biological and chemical laboratories should be set up for opening and closing. The main gate should be opened and closed by the duty officer. The relevant management personnel should be responsible for opening and closing.
In the winter, keep warm and venting the water pipes, and prevent the water pipes from being caused by freezing and bursting.


4. Antivirus
The laboratory contains toxic substances, which will produce toxic gas and venom in the experiment, so it is necessary to do anti-virus work. Toxic substances should be properly stored and stored, and the toxic residual liquid after the experiment should be properly disposed of.
Establish special warehouses for dangerous goods. All dangerous drugs such as flammable, toxic oxidants and corrosive agents should be stored separately in counters.
Chemical dangerous goods should be inspected and registered before entering the warehouse. After storage, they should be inspected regularly and strictly managed to achieve “five pairs of management”, namely, double management, double reception, double picking, double billing, and double lock.
Strictly follow the operating procedures in the experiment, the production of toxic gases should be carried out in the fume hood, and the student laboratory is equipped with an exhaust fan to keep the ventilation in the laboratory.
The student's laboratory table is equipped with a waste liquid bottle, and the chemical laboratory is equipped with a waste liquid tank.
There is a waste liquid treatment tank to prevent the spread of toxic substances and affect humans and animals.


5. Safe use of electricity
The installation layout of the laboratory power supply line should be reasonable, scientific and convenient. The building has a power main gate, a layered gate, and an electric shock protector.
The general gate is controlled by the daily value personnel, and the opening is controlled by the management personnel of each room, and the opening and closing situation is checked every day.
The student's main power supply gate is located near the podium, and the teacher is responsible for controlling the stoppage.
Laboratory circuits and electrical equipment should be regularly inspected to ensure safety and never work with disease. If there is a fire in the appliance, immediately turn off the power and extinguish it with sand or a fire extinguisher. Never use water or a foam fire extinguisher to extinguish the fire before the power is turned off.
In the event of a personal electric shock, the power should be cut off immediately, artificial respiration should be carried out in time, and the hospital should be sent to the hospital for treatment.

Online QQ Service, Click here

QQ Service

Wechat Service