Precautions

1. Open the original packaging and check for obvious particles and debris.

2. Do not apply too fast, so as not to apply to the head.

3. If the coating is not applied or the pressure roller is lifted, the pressing time is too short, and the pressure roller time can be adjusted again.

4. The coated aluminum bulkhead should not be placed for too long, otherwise it will affect the effect of bonding and sealing.

5. The deviation of the transmission belt should be corrected in time. If there is too much adhesive on the transmission belt, it should be removed in time. If necessary, a small amount of paraffin can be applied to prevent the adhesive tape.

6. After the first sealant is applied, it should be pressed as soon as possible to avoid the impact of ambient temperature on the product adhesion. The hollow glass that has not been coated with the second sealant after rolling should be placed horizontally and can be erected in a short time. Put, but not collision, avoid unnecessary misalignment.

7. Before making double-pass insulating glass, the necessary compatibility test must be performed on the double-pass sealant to prevent the two sealants from being compatible.