Home    Products    Defoamer for coating    Paint defoamer IOTA XPJ-100F

Details Information
Recommend

Paint defoamer IOTA XPJ-100F

Paint defoamer IOTA XPJ-100F


Typical characteristics:

Appearance:     Light gray to yellow translucent oily liquid

Density :            1.0±0.1 (25°C)

Viscosity:          200-300 (mpas.25 ° C)

Active content:        ≥99%

Water dispersibility:   Good self-emulsifying ability

Shelf life:          6 months


Product introduction:

This product is made from the main ingredients such as mineral oil and other auxiliary materials. It can quickly eliminate pure C, styrene, ethylene, ethylene and polyvinyl acetate and styrene-butadiene latex foam. It is especially effective for the production of styrene-acrylic latex paint. It has low dosage, fast defoaming, long-term foam inhibition, water dispersion. Goodness and other advantages, the use is not affected by the PH value. It is suitable for coatings and various latexes. It has strong adaptability, does not produce shrinkage cavities and affects the performance of coatings and latexes.


Use:

Waterborne coatings, production and use of various latexes such as styrene-acrylic

Paper coating section is used to eliminate paint blistering and avoid defects such as depressions

Other water and oily environments that are not suitable for silicones


How to use

When used in water-based coatings and latexes, it can be added at one time in the grinding stage or in different stages according to the production process of the products used.
When used for paper coating, it is suitable to be added when the coating is applied. It can also be added into the coating aid tank during the coating process. The recommended dosage is (0.1-0.3)%. The specific suitable amount should be determined according to the specific process conditions.


Package:

25kg, 50kg, 200kg plastic drums and 200kg inner coated iron drums.


Storage and transportation:

It is suitable for storage at room temperature. Do not place it near the heat source. Do not expose it to sunlight. Do not add acid, alkali or salt to the defoamer. After dilution with water, it can not be stored for a long time. It will not be stratified within one year. If it exceeds this period, there will be delamination and demulsification. It can be stirred evenly before use, and it will not be affected by the use effect. It will be transported as non-dangerous goods.
 

Safe for use:

Customers should read the product manual carefully and use the necessary defoaming test before using this product in batches to ensure safe use. If you have any questions about the product, please contact us, our company will be happy to help you.

This material has been compiled based on our current knowledge and experience, and this information should not be used to replace any tests you may need to fully meet your characteristics when using our products on a large scale or in batches. Due to the loss caused by the product not meeting the sales quality indicators, the company only undertakes to refund the purchase price or replace the product. The application or use suggestions we provide are for reference only.

 



Online QQ Service, Click here

QQ Service

Wechat Service