IOTA
IOTA 9606: Non-volatile carrier, with unique excellent adhesion properties, can produce immediate color fixing effect, resistance to migration without sticky feeling and "dried-up" feeling, and give v......
2020-03-02INCI name: Cyclopentasiloxane (and) Trimethylsiloxysilicate Cyclopentamethicone (and) trimethylsiloxy silicate Using cyclopentasiloxane as diluent Large molecular weight silicone resin mixture ......
2020-03-02What is hydrophobic Hydrophobicity is the manifestation of the hydrophobic effect on the surface of the material. The following figure shows the force of a liquid on a solid ......
2020-02-281.Polyurethane potting compound The temperature requirement is not more than 100 degrees Celsius. There are many bubbles after encapsulation. The encapsulation conditions are under vacuum, and t......
2020-02-28The pesticides of the same composition have different effects from different manufacturers. Among them, the auxiliary agent has a large factor. Silicone is a commonly used auxiliary agent on pestic......
2020-02-28The structure of the thermosetting liquid silicone rubber (LSR) injection mold is similar to the mold structure used for thermoplastic compounds in general, but there are many significant differences.......
2020-02-28Why does silicone stick? When using silicone or using silicone to make molds, more or less will encounter silicone sticking with the mold! No matter what material your mold is made of, there will......
2020-02-28Adding a thermoplastic material with a certain melting temperature or softening temperature to the vinyl silicone rubber, the thermal shrinkage of the silicone rubber compound can reach 35% to 50%. No......
2020-02-27Good electrical performance Optimized electrical properties of ceramicized silicone rubber—the volume resistivity before sintering is not less than 1015Ω • cm. As the sintering temperature increas......
2020-02-27Fluid is a degree of polymerization of a chain structure type polyorganosiloxane . It is dimethyldichlorosilane First water hydrolysis condensation ring body , the ring body by cracking distillation t......
2020-02-27Firstly, the colorant is mixed with liquid compounding agent (such as plasticizer), then the paste or paste is made by grinding with a three-roll mill, and then the paste is mixed into silicone rubber......
2020-02-27There are many ways to classify liquid silicone rubber. Interested friends can look at the links. Addition liquid silicone rubber is generally colorless and transparent, and condensation liquid sil......
2020-02-271, raw rubber: Silicone rubber raw rubber types are: dimethyl silicone rubber (referred to as methyl silicone rubber), methyl vinyl silicone rubber (referred to as vinyl silicone rubber), meth......
2020-02-261. Adhesive tape should be stored in the warehouse to avoid sunshine and rain. Contact with organic solvents of acid-base oil should be prohibited and kept clean and dry. The room temperature should b......
2020-02-26① Usually requires: (1) The surface of the reinforcing filler particles must have strong chemical activity, which can have a good combination with the rubber, and can improve the mechanical properti......
2020-02-26
